HDMITM Extender over 5-Wire (RGBHV or 5 x RCA) up to 330ft with Bi-directional IR AT-HD-RG100SR User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 www.atlona.
TABLE OF CONTENTS 1. Introduction 2 2. Package Contents 2 3. Features 2 4. Specification 3 5. Panel Descriptions 4 5.1. Transmitting Module 4 5.1.1. Front Panel 4 5.1.2. Rear Panel 4 5.2. Receiving Module 4 5.2.1. Front Panel 4 5.2.2. Rear Panel 5 6. IR Pass-through 5 6.1. IR Extenders 5 6.2. IR Sockets 5 6.3. Definition of IR Earphone Jack 6 6.4. Supported IR Data Format 6 7. HDMITM Pin Definition 7 8. Coaxial Cable 7 9.
INTRODUCTION The AT-HD-RG100SR HDMITM over 5-Wire Extender with Bi-Directional IR allows user to extend HDMITM transmission range up to 330ft (100m) with resolutions as high as 1080p 50/60Hz and also supports 3D. AT-HDRG100SR is extremely easy to install and works perfectly with existing RGBHV or RG-6 coaxial cables, even original Component + Audio cables will work, which makes it perfect to retrofit those extenders to the current technology.
SPECIFICATIONS Technical 3D Support HDMITM compliance HDCP compliance Video bandwidth Video Support Audio Support HDMITM over Coax transmission range HDMITM equalization Input TMDS signal Input DDC signal ESD protection PCB stack-up Input Output IR remote control HDMITM connector BNC connector 3.
PANEL DESCRIPTIONS 1. Transmitting Module 1.1. Front Panel 1 2 3 4 1. IR Receiver: 3.5mm socket for plugging in the extension cable of IR receiver 2. IR Blaster: 3.5mm socket for plugging in the extension cable of IR blaster 3. HDMITM IN: connect to a HDMITM source device with a HDMITM male-male cable here 4. +5V DC: connect to 5V DC power supply unit 1.2. Rear Panel 2. Receiving Module 2.1. Front Panel 1 Toll free: 1-877-536-3976 Local: 1-408-962-0515 2 3 4 4 www.atlona.
1. IR Receiver: 3.5mm socket for plugging in the extension cable of IR receiver 2. IR Blaster: 3.5mm socket for plugging in the extension cable of IR blaster 3. HDMITM OUT: connect to a HDMITM display with a HDMITM male-male cable 4. +5V DC: connect to 5V DC power supply unit 2.2. Rear Panel IR PASS-THROUGH 6.1. IR Extenders. IR Blaster IR Receiver 6.2.
6.3. Definition of IR Earphone Jack. IR Blaster IR Receiver 1. Power 2. IR Signal (60KHz) 3. Grounding 1. IR Signal (60KHz) 2. Grounding 1 2 3 12 6.4. Supported IR Data Format.
HDMITM PIN DEFINITION Type A (Receptacle) HDMI Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 TMDS Data2+ TMDS Data2 Shield TMDS Data2TMDS Data1+ TMDS Data1 Shield TMDS Data1TMDS Data0+ Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 TMDS Data0 Shield TMDS Data0TMDS Clock+ TMDS Clock Shield TMDS ClockCEC Reserved (N.C.
SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Do not modify the wall plug. Doing so will void the warranty and safety features. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
WARRANTY Limited Warranty Atlona Technologies warrants that (a) its products (the AT-HD-RG100SR) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
ATLONA PRODUCT REGISTRATION Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure.
