Atlona HDMI with Bi-Direction IR Extender over Single CAT5, 6, and 7 up to 130 Feet AT-HD4-V40SRS User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 atlona.
Table of Contents 1. Introduction .................................................. 3 2. Package Contents .................................................. 3 3. Features .................................................. 3 .................................................. 4 5. Panel Descriptions .................................................. 5 5.1. Transmitting Module .................................................. 5 5.1.1. Front Panel ............................................
INTRODUCTION The Atlona AT-HD4-V40SRS is an HDMI with Bi-Directional IR Extension Kit. The extenders are designed to handle full 1080p up to 130ft and 1080i/720p up to 200ft. The HD4-V40SRS are capable of supporting very high bandwidth and there are able to handle all 7 x 3D formats. The Atlona HD4-V40SRS are based on the latest HDMI technology and therefore are capable of fully supporting HDCP 2.0, Deep Color and DTS-HD or Dolby TrueHD audio.
SPECIFICATIONS Technical Role of usage HDCP compliance Video bandwidth Video support HDMI over UTP transmission Audio support Signal Equalization Input TMDS signal Input DDC signal ESD protection PCB stack-up IR pass-thru Input Output HDMITM source control IR remote control HDMITM connector RJ45 connector 3.
PANEL DESCRIPTIONS 5.1. Transmitting Module 5.1.1. Front Panel 1 2 3 4 1. MODE: 0 - EDID Full-HD (up to 1080p@60) -24bit 2D video & 7.1ch audio – long distance 1 - EDID Full-HD (up to 1080p@60) – 24-bit 2D video & 2ch audio – long distamce 2 - EDID Full-HD (1080p@60) - 36bit 2D video & 7.1ch audio 3 - EDID Full-HD (1080p@60) - 36bit 2D video & 2ch audio 4 - EDID Full-HD (1080p@60) - 36bit 3D video & 7.
5.2. Receiving Module 5.2.1. Front Panel 1 2 3 4 1. EQ: Adjust the 8-level equalization control to the received HDMITM signals. The HDMITM signal level varies from MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. 2. HDMI OUT: Connect to HDMI display with a HDMI male-male cable. 3. IR Receiver: Infrared 3.
IR PASS-THROUGH 6.1. IR Extenders. IR Blaster IR Receiver 6.2. IR Sockets. IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other end to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices.
6.4. Supported IR Data Format. Data Format Suitable NEC v RC5 v TOSHIBA MICOM CODE v GRUNDIG CODE v SONY 12 BIT CODE v SONY 15 BIT CODE v SONY 20 BIT CODE v Not Recommended RCA CODE v RCM CODE v MATSUSHITA CODE v MITSUBISHI CODE v ZENITH CODE v JVC CODE v M50560-001P v MN6125H v MN6125L v MN6014_C5D7 v MN6014_C6D6 v MC14457P v LC7464(AHEA) v GEMINI_CM v INSTALLATION 1.
PIN DEFINITION 9.1. HDMITM Type A (Receptacle) HDMITM Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 TMDS Data2+ TMDS Data2 Shield TMDS Data2TMDS Data1+ TMDS Data1 Shield TMDS Data1TMDS Data0+ Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 TMDS Data0 Shield TMDS Data0TMDS Clock+ TMDS Clock Shield TMDS ClockCEC Reserved (N.C. on device) Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 SCL SDA DDC/CEC Ground +5 V Power Hot Plug Detect 9.2.
CONNECTION DIAGRAM DVD Player AT-HD4-V40SRS Transmitter CAT5/6 cable AT-HD4-V40SRS Receiver HDTV PERFORMANCE GUIDE Performance rating Wiring Shielding Solid Unshielded (UTP) Shielded (STP) Stranded Unshielded (UTP) Shielded (STP) Termination Toll free: 1-877-536-3976 Local: 1-408-962-0515 Type of category cable CAT5 CAT5e CAT6 *** **** ***** *** *** **** * ** ** * * ** Please use EIA/TIA-568-B termination (T568B) at any time 10 atlona.
NOTICE 1. When adjusting the signal level on the receiver module, please dial the rotary control switch from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level 2. Wrongly insert IR blaster and IR receiver to wrong 3.5mm infrared sockets may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets. 3.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (the AT-HD4-V40SRS) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.
