Quick Start Guide
7
Installation Guide
AT-HDR-EX-70-2PS
7. Extract the rmware, from the archive le, to the Windows desktop or other folder.
8. Click the Browse button within the AT-HDR-EX-70-2PS Analyzer software. The Open le
dialog box will be displayed.
9. Select the proper rmware le from the location specied in step 6:
Transmitter: HDR-2PS-TX_[version].hex
Receiver: HDR-2PS-RX_[version].hex
10. Click the Open button on the dialog box.
11. Click the Load button, within the AT-HDR-EX-70-2PS Analyzer software, to begin the
rmware update procedure. During the update process, the current progress will be
displayed in the progress bar.
12. Once the upgrade process is complete, set the DIP switch, on the bottom of the unit, to the
HDBaseT position.
13. Reconnect the power supply to the unit.
14. Repeat steps 2 though 13 for the other unit(s).
Progress bar
IMPORTANT: The DIP switch, on the bottom of both the transmitter and
receiver, must be set to HDBaseT mode before reconnecting the power in order
to resume normal operation.