User Manual AtlonA 1x4 HDMITM Splitter with CAT5/6 Outputs and 1xLocal HDMITM Output (SENDER ONLY) AT-HD-V14SS www.atlona.
TABLE OF CONTENTS 1. INTRODUCTION ................................................ 3 2. FEATURES ................................................ 3 3. PACKAGE CONTENTS ................................................ 4 4. SPECIFICATIONS ................................................ 5 5. PANEL DESCRIPTIONS ................................................ 6 5.1. Front Panel ................................................ 6 5.2. Rear Panel ...............................................
INTRODUCTION: Atlona Technologies AT-HD-V14SS 1x4 HDMI TM Splitter with CAT5/6 Outputs and 1x Local HDMI TM Output (SENDER ONLY) is the perfect solution for those who want to display a single source on 4 or more displays using a Single Twisted Pair Cat5 or Cat6 Cable. AT-HD-V14SS is capable of HDTV resolutions up to: 1080p@110ft and 1080i@200ft. Note: A receiver unit (Balun) is required for each display and sold separately (Model: AT-HDRS or AT-HD15SRS).
PACKAGE CONTENTS: • 1x AT-HD-V14SS unit • 1x 5V DC locking power supply unit (110/240v universal) • 1x User's manual www.atlona.
SPECIFICATIONS: Model Name AT-HD-V14SS AT-HDRS AT-HD15SRS 1x4 Splitter / Sender Long range receiver Short range receiver Technical Role of usage HDMITM compliance HDMITM 1.3c HDCP compliance Yes Video bandwidth Single-link 225MHz (6.75Gbps) Video support 480i / 480p / 720p / 1080i / 1080p60 12-bit Transmission Full HD (1080p): 110ft (35m) [CAT5/6] HD (720p/1080i): 200ft (60m) [CAT5/6] Audio support Surround sound (up to 7.
PANEL DESCRIPTIONS: 5.1. Front Panel 2D 2-CH 3D Multi-CH Bitstream 1x4 HDMI v1.3 Distribution Amplifier with CAT5/6 Outs and 1 x Local HDMI EDID LEAR NIN G 1080i 720p 1080p Out Default EDID AT-HD-V14SS POWER SIGNAL AT-HD-V14SS POWER: bright - power on; dark - power off. SIGNAL: bright - HDMITM source signal is detected; dark - no HDMITM signal. 5.2. Rear Panel AT-HD-V14SS ID G EDNIN LEAR Default EDID 1080i 720p 1080p 1x4 HDMI v1.
5.3. Top Panel 2D 3D Multi-CH 2-CH Bitstream EDID LEARNING 1080i 720p 1080p 1x4 HDMI Distribution Amplifier with CAT5/6 Outs and 1 x Local HDMI Out Default EDID AT-HD-V14SS EDID LEARNING vs. Default EDID: When the DIP switch is set to Default EDID, users can adjust desired EDID setting for the default EDID profile. When the DIP switch is set to EDID LEARNING, the AT-HD-V14SS will learn the EDID from the device connected to the HDMI TM output port.
INSTALLATION: 1. Turn off all devices, including the displays. 2. Connect the HDMITM source to the HDMITM INPUT on the AT-HD-V14SS. 3. Connect to each Receiver Unit (AT-HDRS or AT-HD15SRS) with a CAT5/6 cable via RJ45 ports. 4. Connect a HDMITM displays to each HDMITM OUTPUT on each Receiver Unit with a HDMITM cable. 5. Plug in the 5V DC power supply units to the locking power jacks on the Receiver Units and the AT-HD-V14SS. 6.
EDID LEARNING: 1. To learn EDID from desired HDMITM display, connect the display to the HDMITM output port that needs to provide the EDID information for the AT-HD-V14SS to learn from. 2. Dial the DIP switch from Default EDID to EDID LEARNING and stay at the Learn EDID position. 3. The SIGNAL (green LED) will blink for a few seconds then stop to indicate the EDID learning is complete. 4. Do not dial the DIP switch back to Default EDID as doing so will reset the EDID profile. 5.
PERFORMANCE GUIDE: Performance rating Wiring Solid Stranded Type of category cable Shielding CAT5 CAT5e CAT6 Unshielded (UTP) Shielded (STP) Unshielded (UTP) Shielded (STP) Termination Please use EIA/TIA-568-B termination (T568B) at any time RJ45 / CAT5 REFERENCE: ATLONA PRODUCT REGISTRATION: Thank you for purchasing this Atlona product — we hope you'll enjoy it. We also hope that you'll take a few moments to register your new purchase.
SAFETY INFORMATION: Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Do not modify the wall plug. Doing so will void the warranty and safety features. This equipment should be installed near the socket outlet and the device should be easily accessible in case it requires disconnection.
WARRANTY: 1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the "Product") will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.