User manual

Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
atlona.com
On Screen Display Menu
1st Tier Option 2nd Tier Option Adjustment
Video PICTURE MODE USER / STANDARD / VIVID / MOVIE
CONTRAST 0 ~ 100 of Contrast Level
BRIGHTNESS 0 ~ 100 of Brightness Level
HUE 0 ~ 100 of Hue Level
SATURATION 0 ~ 100 of Saturation Level
SHARPNESS 0 ~ 100 of Sharpness Level
SCALE OVERSCAN / UNDERSCAN / LETTERBOX/
PANSCAN / FULL
NR LOW / MIDDLE / HIGH / OFF
EXIT Back to the 1st Tier
COLOR COLOR TONE USER / NORMAL / WARM / COOL
RED 0 ~ 100 of Red Color Level
GREEN 0 ~ 100 of Green Color Level
BLUE 0 ~ 100 of Blue Color Level
EXIT Back to the 1st Tier
OUTPUT VGA (640x480) 480i 576i WXGA (1280x800)
SVGA (800x600) 480p 576p WSXGA (1680x1050
XGA (1024x768) 720p@60Hz 720p@50Hz WUXGA (1920x1200)
UXGA (1600x1200) 1080i@60Hz 1080i@50Hz WUXGA+ (1440x900)
SXGA+ (1400x1050) 1080p@60Hz 1080p@50Hz 1080p@30Hz
OSD HPOSITION 0 ~ 100 of OSD Horizontal Position
VPOSITION 0 ~ 100 of OSD Vertical Position
TIMER 0 ~ 100 of OSD Show Time (sec.)
BACKGROUND (transparency) 0 ~ 100 of OSD Transparency Level
COLOR BAR Display COLOR BAR or BLACK SCREEN when
source is not transmitting signal
EXIT Back to the 1st Tier
AUDIO SOURCE HDMI / L/R / COAXIAL
DELAY OFF / 40MS / 110MS / 150 MS
SOUND ON / MUTE
EXIT Back to the 1st Tier
INFORMATION SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close the OSD Menu
Note: If there is no signal coming from the source selected then either a color bar or black screen will display.
Switch between the color bar and black screen by selecting yes or no on colorbar in the OSD option of the On
Screen Display Menu.