User Manual

AT-OME-MH21
36
Device Operation
Changing the Telnet Port
Typically, the Telnet service is assigned to TCP port 23. This is the default setting for the AT-OME-MH21.
However, depending upon the network environment, the default Telnet port can be changed.
1. Login to the web server. Refer to Web Server (page 20) for more information.
2. Click System in the menu bar.
3. Locate the Telnet Port eld and enter the desired port in the eld.
4. Click Save to commit changes.
1. Login to the web server. Refer to Web Server (page 20) for more information.
2. Click System in the menu bar.
3. Click the Telnet Login Mode toggle switch.
• Set this toggle switch to ON to prompt for user credentials.
• Set this toggle switch to OFF to bypass user credentials request.
4. Click Save to commit changes.
Telnet Login Mode
When a Telnet session is request, the AT-OME-MH21 provides the option to prompt for user credentials or bypass
authentication before the Telnet session begins. This credentials prompt option can enabled or disabled. When
prompting for user credentials, use the same login information required by the built-in web server.