User Manual

AT-OME-MH21
52
Conguration and Management Interfaces
EDID Settings
Click these drop-down lists to select the desired EDID to be used for each input. The following EDID presets are
available. When selecting an EDID, make sure that the display/sink device is capable of supporting the resolution/
timing. If the sink device is not able to support a feature, then the source will not be displayed. Selecting the
Connected Displays EDID will provide the most compatible settings for most displays. In addition, three memory
locations are available for storing captured EDID data. If an EDID is stored in a memory location, it will also be added
to the list available EDID selections.
EDID Saved
The AT-OME-MH21 provides one memory location for storing captured EDID data. Click this drop-down lists to
select and store the external EDID.
EDID listing Description
Connected Displays Uses the EDID of the connected display
MEM 1 Uses a custom EDID
ATL 3840x2160P60 2CH, HDR 3840x2160 @ 60 Hz, two-channel audio, HDR
ATL 1920x1200 2CH 1920x1200, two-channel audio
ATL 1920x1080P 2CH 1920x1080p, two-channel audio
ATL 1366x768 PCM 1366x768, PCM audio support
ATL 1280x800 PCM 1280x800, PCM audio support
ATL 1280x720 PCM 1280x720, PCM audio support
ATL 1024x768 PCM 1024x768, PCM audio support
EDID Page
This page provides controls for selecting and storing EDID data. Refer to EDID Management (page 28) for more
information.