Installation Guide

ManualsBrandsAtlona ManualsHome Theater NetworkingAtlona - Omega Series 4K/UHD 6 x 2 Matrix Presentation Switcher - Black

Installation Guide

AT-OME-PS62

Omega 4K/UHD 6x2 Matrix Switcher for HDMI, USB-C, and

HDBaseT with USB

AT-OME-PS62

1 x AT-OME-PS62

1 x Captive screw connector, 6-pin

4 x Captive screw connector, 5-pin

1 x Captive screw connector, 3-pin

1 x USB-C cable

4 x Mounting screws

1 x Pair rack mount ears

1 x IEC power cord

1 x Installation Guide

Package Contents

The Atlona AT-OME-PS62 is a 6x2 matrix switcher with HDMI, USB-C, and HDBaseT inputs, plus

HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern AV

communications and collaboration, the OME-PS62 features HDBaseT extension for video up to

4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet

(100 meters). The HDMI and USB-C inputs support video up to UHD/60 4:4:4. The OME-PS62 is

HDCP 2.2 compliant and features 4K/60 4:4:4 upscaling and downscaling for the HDMI output.

The integrated USB extension addresses the challenge of connecting between USB devices at

remote locations, and is ideal for software video conferencing and touch or interactive displays.

The OME-PS62 includes USB 2.0 and USB-C interfaces for three host PCs, plus two peripheral

devices such as a camera, microphone, speaker phone, or keyboard and mouse. The OME-PS62

is ideal for a wide range of 4K presentation applications with Omega Series transmitters and

receivers, plus local HDMI and USB-C sources and the Gain™ 60 or Gain 120 ampliers.

IMPORTANT: Visit https://atlona.com/product/AT-OME-PS62 for the latest rmware

updates and User Manual.

Summary of content (8 pages)

PAGE 1
Installation Guide AT-OME-PS62 Omega 4K/UHD 6x2 Matrix Switcher for HDMI, USB-C, and HDBaseT with USB AT-OME-PS62 The Atlona AT-OME-PS62 is a 6x2 matrix switcher with HDMI, USB-C, and HDBaseT inputs, plus HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-PS62 features HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters).
PAGE 2
Installation Guide AT-OME-PS62 Panel Descriptions 1 OMEGA TM PRESENTATION SWITCHER 3 4 5 LINE IN MIC AT-OME-PS62 1 L R AUDIO IN 6 L 2 R L AUDIO OUT L R 1 2 MENU 1 2 3 ENTER 4 5 6 7 2 R RS-232 89 IP MODE 48V MIC LINE RESET RX TX 1 HDBaseT IN 10 1 2 3 4 HDMI IN 5 12 6 USB-C IN 11 1 USB HUB HOST USB 14 13 Function Buttons 9 MENU - Access the front panel menu or use as a back button within the menu.
PAGE 3
Installation Guide AT-OME-PS62 RS-232 A 3-pin captive screw connector has been included for RS-232. GND RX TX RX TX GND NOTE: Port 1 is for unit control and port 2 will control the display. Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground). Ground will be shared between port 1 and port 2. Audio Connect to an audio DSP, amplifier, or other audio distribution devices.
PAGE 4
Installation Guide AT-OME-PS62 Mounting Instructions The AT-OME-PS62 can be mounted in a standard 19-inch rack or placed freestanding on top of a desk or table. Rack installation 1. Remove the front two case screws from the sides of the case. 2. Attach the included rack ears to each side of the AT-OME-PS62 using the case screws.
PAGE 5
Installation Guide AT-OME-PS62 Surface mounting The AT-OME-PS62 can be placed freestanding on top of a desk, a table, or in a cabinet. To prevent damage to the surfaces or unnecessary movement of the matrix, four feet have been included. 1. Turn the unit upside down. 2. Install each foot using the included feet screws, the rubber grips of the feet should be facing up during installation. 3. Turn the unit right-side up and place it in the desired location.
PAGE 6
Installation Guide AT-OME-PS62 Installation 1. Connect compatible HDBaseT transmitters (e.g. AT-OME-ST31 or AT-OME-EX-TX) to the HDBaseT input ports. 2. Connect HDMI and USB-C sources to the HDMI and USB-C input ports. 3. *Optional* Connect 2CH sources to the analog AUDIO IN ports. 4. *Optional* Connect a MIC or line input to the MIC/LINE input port and use the dip switch to ensure the port is in the correct mode. 5.
PAGE 7
Installation Guide AT-OME-PS62 Accessing the webGUI The AT-OME-PS62 includes a built-in webGUI, which allows easy remote management and control of all features. Follow the instructions below to access the webGUI. 1. Make sure that an Ethernet cable is connected between the LAN port on the AT-OME-PS62 and the network. 2. Press the DEVICE IP button on the front panel to display the IP address of the unit in the top left corner of the connected display. 3.
PAGE 8
Installation Guide AT-OME-PS62 Version 1 Toll free US International atlona.com • 877.536.3976 • 41.43.508.4321 © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.