Specification Sheet

1
AT-OME-PS62
for HDMI, USB-C, and HDBaseT with USB
4K/UHD 6x2 Matrix Switcher
Omega
TM
The Atlona AT-OME-PS62 is a 6x2 matrix presentation switcher with HDMI, USB-C, and HDBaseT inputs, plus
HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern AV communications
and collaboration, the OME-PS62 features HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio,
control, Ethernet, and USB over distances up to 330 feet (100 meters). The HDMI and USB-C ports support video up
to UHD/60 4:4:4. The OME-PS62 is HDCP 2.2 compliant and features 4K/60 4:4:4 upscaling and downscaling for the
HDMI output. The integrated USB extension addresses the challenge of connecting between USB devices at remote
locations, and is ideal for software video conferencing and touch or interactive displays. The OME-PS62 includes
USB 3.0 and USB-C interfaces for three host PCs, plus two peripheral devices such as a camera, microphone,
speaker phone, or keyboard and mouse. The OME-PS62 is ideal for a wide range of 4K presentation applications
with Omega Series transmitters and receivers.
Introduction
Applications
Meeting rooms and conference rooms
The OME-PS62 can serve as an AV integration centerpiece in a credenza, with interfacing into sources in the
rack, plus remote AV and USB connectivity from wall, table, and display locations.
Video conferencing and USB data
With compatible Omega Series endpoints, this presentation switcher provides interfacing for local and remote
USB devices for soft codec conferencing, with video and USB switched together between host PCs. As a matrix
switcher with scaling, the OME-PS62 is also ideal for hardware-based video conferencing, with the ability to
route and optimize any source content to the codec far-end.
Auditoriums and lecture halls
The HDBaseT output of the OME-PS62 can be used to extend 4K video to a projector, while the HDMI output
serves to optimize for a 1080p or 4K condence monitor. Also available is a microphone input and mixing with
program audio.
Active learning classrooms
In education applications, the OME-PS62 can be installed below each student table, with the HDMI output
feeding a local display, and the HDBaseT output used to send content to the main classroom AV switcher and
display.
Lecture capture
The secondary, HDMI output can also be used to feed into a lecture capture or streaming video system, with
video scaled as appropriate for the application.

Summary of content (4 pages)