User Manual

AT-OME-ST31
18
Basic Operation
Controlling Audio
The AT-OME-ST31 provides complete control over both audio muting and audio input sources. Audio muting can
be controlled on both HDMI and HDBaseT outputs. Analog audio can also be embedded on the HDBaseT or HDMI
outputs using a 3.5 mm mini-stereo cable.
Audio Output Muting
Embedding External Analog Audio
1. Open the desired web browser and enter the IP address of the AT-OME-ST31.
2. Log in as the admin user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username: admin
Password: Atlona
3. Click A/V Settings in the menu bar.
4. Locate the Audio section.
5. Click the toggle switch for the desired output. To mute the audio output on the HDBaseT Output, click this
toggle switch to the OFF position. To re-enable the audio for that output, set the toggle switch to the ON
position.
1. Open the desired web browser and enter the IP address of the AT-OME-ST31.
2. Log in as the admin user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username: admin
Password: Atlona
3. Click A/V Settings in the menu bar.
4. Locate the Audio section. Any of the three inputs can be set to receive either the existing digital audio from the
source, or an external analog source.