User Manual
Table Of Contents
- Introduction
- Features
- Package Contents
- Panel Description
- Installation
- Configuration
- Basic Operation
- IR Control
- Advanced Operation
- The AMS Interface
- Appendix
AT-OMNI-121 / AT-OMNI-122
115
Command
Each of these The Command blocks are used to enter the command string for the desired operation: Display O,
Display On, Volume Down, and Volume Up.
Mode
Click this drop-down list to select where the command will be interpreted.
ASCII
Enter the ASCII representation of the command string in this eld.
HEX
Enter the hexadecimal representation of the command in this eld.
Interpret on Description
Raw Commands are interpreted at the encoder.
decoder Commands are interpreted at the decoder.
NOTE: When entering the command string, it is not required to enter the string under both the ASCII
and HEX fields. The decoder requires that only one field be completed.
Command
The AMS Interface