User Manual
Table Of Contents
- Introduction
- Features
- Package Contents
- Panel Description
- Installation
- Configuration
- Basic Operation
- IR Control
- Advanced Operation
- The AMS Interface
- Appendix
AT-OMNI-121 / AT-OMNI-122
126
Appendix
5. After the UPDATE FIRMWARE button is clicked, the Upgrade Firmware Started message box will be displayed.
6. Click the orange up-arrow icon, in the upper-right corner of the screen, as shown below. If this icon is orange,
it indicates that a rmware update is in progress.
The progress bar for the update process will be displayed. The update process should take a few seconds.
7. Click the “X” to close out the progress bar window, then click the CLOSE button to dismiss the Firmware
Update message box.
8. The rmware update process is complete.
9. Clear the web browser cache and refresh the web page. The new rmware version will appear in the Firmware
Version eld, in the DEVICE INFO page.