User Manual
Table Of Contents
- Introduction
- Features
- Package Contents
- Panel Description
- Installation
- Configuration
- Basic Operation
- IR Control
- Advanced Operation
- The AMS Interface
- Appendix
AT-OMNI-121 / AT-OMNI-122
67
Advanced Operation
EAP-TLS Protocol
1. Login to AMS. Refer to Accessing Decoders in AMS (page 19), if necessary.
2. The AMS Dashboard will be displayed.
3. Click the icon, in the upper-left corner of the AMS Dashboard.
4. Click Devices > All and select the desired decoder from the Device List.
5. Click NETWORK in the menu bar.
6. Click the 802.1x Mode drop-down list, at the bottom of the page, and select EAP-TLS.
7. Three additional elds will be displayed: Client certicate, Client private key, and CA certicate. Provide the
required information in each eld. Refer to the illustration on the next page, if necessary.