Atlona Stereo/Mono Audio Amplifier AT-PA100-G2 User Manual atlona.
Table of Contents 1. Introduction ............................................................................................ 3 2. Package Contents ............................................................................................ 3 3. Features ............................................................................................ 3 4. Specifications ............................................................................................ 4 5. Panel Descriptions a.
Introduction Small, energy efficient, and affordable the Atlona Stereo/Mono Audio Amplifier fits the needs of most offices, classrooms and more. Unlike traditional A/B amplifiers the Class D audio amplifier is energy efficient and easily integrated behind a TV where space is limited.
Specifications Input Ports 2 x RCA connectors 1 x 3.5mm Audio 1 x 3.5mm IR 1 x Captive Screw MIC 1 x Captive Screw RS-232 Output Ports 1 x Captive Screw Audio 1 x 3.5mm Loop Out Dimensions (HxWxD) 1.5 x 3.78 x 3.43 (inch) or 38 x 96 x 87 (mm) Weight 0.66lbs or 0.3kg Power consumption 3.6W Audio Gain: 32dB Frequency Range: 20Hz to 20KHz Signal/Noise Ratio: 80dB (at max output) Total Harmonic Distortion: 1% (1KHz), 0.
Back Panel 1 2 3 1. 24V Port: Connect included power supply here. 2. 3.5mm variable audio loop out: Loop out to another AT-PA100-G2 or audio amplifier with a 3.5mm stereo audio connector 3. Captive Screw Audio: Connect to speakers Top Panel 1 2 3 4 1. Input Selection Button: Toggle between the RCA input and 3.5mm audio input 2. Audio Control Button: Adjust the volume of the MIC, Line, or the level of Bass and Treble with this button 3.
MIC Connection 48V (Condenser MIC) ─ Negative ╧ Ground + Positive Connect a condenser MIC using Positive to the “+”, negative to the “-” and your ground/power to the “╧”. The 48V option is for MICs that require phantom power from an external device. Typically used by condenser MICs. Only a balanced connection is used in this mode. MIC (Condenser) MIC (Dynamic MIC) Connect Dynamic or Self-Powered Condenser MICs in this mode. Connections can be either balanced or unbalanced.
Output Connection Stereo (Default) Default output connection is Stereo. Connect the “+” and “-” of the left side to the left speaker and the “+” and “-” of the right side to the right speaker. Each speaker receives 20W in this mode. L (20W) R (20W) Mono (dual) When Mono is selected, the audio output is Dual Channel Mono and will output 20W per channel in this mode. Mono Channel (20W) Mono Channel (20W) atlona.
Bridged Mono Channel (40W) Bridged audio will combine both L and R channels into one and outputs 40W to a single speaker. Connection and Installation Line Input MIC Input 20W 20W Line Input Mono: 40W Stereo atlona.
RS-232 Connection RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them, some will be unassigned. 5 4 3 2 1 No. 1 2 3 4 5 6 7 8 9 9 8 7 6 2 5 3 Baud Rate: 9600bps Data Bit: 8bits Pin ---Tx Rx ---Gnd ------------- Parity: None Function Not used Transmit Receive Not used Ground Not used Not used Not used Not used Stop Bit: 1bit Command The command codes are very sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description 5xx% Volume of MIC: xx Preset MIC volume, [xx] arranges from [00] to [60]. Example: 509% --> Volume of MIC: 09 7xx% Volume of LINE: xx Preset line volume, [xx] arranges from [00] to [60]. Example: 723% --> Volume of LINE: 23 8xx% Bass of LINE: xx Preset the bass level, [xx] arranges from [00] to [08]. Example: 803% --> Bass of LINE: 03 9xx% Treble of LINE: xx Preset the treble level, [xx] arranges from [00] to [08].
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (AT-PA100-G2) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure.
