User manual

MIC Connection

MIC

(Condenser)

+ Positive

╧ Ground

─ Negative

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Connect a condenser

MIC using Positive to the

“+”, negative to the “-”

and your ground/power to the “╧”. The

48V option is for MICs that require phantom

power from an external device. Typically

used by condenser MICs. Only a balanced

connection is used in this mode.

Connect Dynamic or

Self-Powered Condenser

MICs in this mode.

Connections can be either balanced or

unbalanced.

48V (Condenser MIC)

MIC (Dynamic MIC)

Line Input (or Wireless MIC)

Connect Wireless MICs

to this port. Either

balanced or unbalanced

connections may be used.

MIC

(Balanced)

(Unbalanced)

+ Positive + Positive

╧ Ground ╧ Ground

─ Negative ─ Negative

Either Unbalanced connection may be used.

NOTE: The MIC input has a power saving standby mode. When the MIC does not receive an

audio signal for 8 seconds it will go into mute/standby mode.