Atlona Stereo/Mono Audio Amplifier AT-PA100-G2 User Manual atlona.
Table of Contents 1. Introduction .......................................................................................... 3 2. Package Contents .......................................................................................... 3 3. Features .......................................................................................... 3 4. Panel Descriptions a. Front Panel .......................................................................................... 4 b. Rear Panel ....
Introduction Small, energy efficient, and affordable the Atlona Stereo/Mono Audio Amplifier fits the needs of most offices, classrooms and more. Unlike traditional A/B amplifiers the Class D audio amplifier is energy efficient and easily integrated behind a TV where space is limited.
Panel Description Front Panel 1 2 3 MONO RS-232 STEREO BRIDGE IR + - RX TX CONTROL f MIC LINE 48V MIC INPUTS 4 L 5 R 3.5mm 6 7 + 1x40Watt@8 - 1. Audio output format switch: Use to switch between Stereo,+ Dual - - +Channel Mono, and 2x20Watt@4 24V Bridged audio outputs LOOP 2. 3.5mm IR: Connect optional IR receiver here for use with optional IR remote (AT-PA1-IR-G2) 3. Captive Screw RS-232: Connect RS-232 here for control OUTPUTS 4.
Top Panel MONO O V RS-232 BRIDGE RX TX IR CONTROL f MIC 48V LINE INPUTS L R 3.5mm 1x40Watt@8 + 2x20Watt@4 + - - + LOOP OUTPUTS INPUT 1 2 3 4 1. Input Selection Button: Toggle between the RCA input and 3.5mm audio input 2. Audio Control Button: Adjust the volume of the MIC, Line, or the level of Bass and Treble with this button 3. Volume adjustment buttons: Use the up and down arrows to turn the volume up or down or adjust the level of the Bass and Treble 4.
Line Input (or Wireless MIC) Connect Wireless MICs to this port. Either balanced or unbalanced connections may be used. ╧ Ground (Unbalanced) ─ ╧ Ground (Unbalanced) Negative Negative + Positive (Balanced) ─ MIC ╧ Ground MIC + Positive MIC Either Unbalanced connection may be used. NOTE: The MIC input has a power saving standby mode. When the MIC does not receive an audio signal for 8 seconds it will go into mute/standby mode.
Bridged Bridged audio will combine both L and R channels into one and outputs 40W to a single speaker. Mono Channel (40W) Connection and Installation Line Input MONO STEREO RS-232 BRIDGE IR + MIC Input - RX TX CONTROL f MIC LINE 48V MIC L INPUTS R 3.5mm 1x40Watt@8 + 2x20Watt@4 + 24V - - + LOOP OUTPUTS INPUT 20W 20W Line Input MONO STEREO RS-232 BRIDGE IR + - RX TX CONTROL f MIC 48V MIC LINE INPUTS 24V L R 3.
RS-232 Connection RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them, some will be unassigned. 5 4 3 2 1 9 8 7 6 2 5 3 Baud Rate: 9600bps Data Bit: 8bits No. 1 2 3 4 5 6 7 8 9 Parity: None Pin ---Tx Rx ---Gnd ------------- Function Not used Transmit Receive Not used Ground Not used Not used Not used Not used Stop Bit: 1bit Command The command codes are case sensitive, do not change capitalization, spacing, or lettering. Command 1A1. 2A1.
Command Feedback 8xx% Bass of LINE: xx 9xx% Treble of LINE: xx Description Preset the bass level, [xx] arranges from [00] to [08]. Example: 803% --> Bass of LINE: 03 Preset the treble level, [xx] arranges from [00] to [08]. Example: 905% --> Treble of LINE: 05 Do not use a carriage return at the end of the commands. “.” and “%” terminate the commands. Note: Factory Default settings, when first turned on, are: volume 50, bass 4, and treble 4.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Atlona, Inc. (“Atlona”) Limited Product Warranty Policy Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.
Disclaimers This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any other current product, technology or any future products or technologies in which Atlona’s products may be used in conjunction with.
