Installation Guide AT-PKT-3H Pocket™ Series Architectural Cable Access Enclosure for Three Cables FOR TABLETOP USE
Installation Guide AT-PKT-3H Package Contents 1 x Tension Ring 2 x Cable ribs 2 x Cable tie holders 2 x Screws for cable ribs 2 1 x AT-PKT-3H 4 x Screws for cable tie holders 3 x Cable bushings 2 x Cable ties 1 x Polyester cable bag 1 x Installation Guide
Installation Guide AT-PKT-3H Installation 1 Drill a 102mm diameter hole into the table. 2 Insert the AT-PKT-3H into the hole. 3 Mounting Dimensions Inches Millimeters Maximum Table Depth 1.97 50 Maximum Cable Size 0.24 6 Minimum Cable Housing 0.
Installation Guide AT-PKT-3H 3 Thread the tension ring onto the AT-PKT3H from below the table, until the unit is secure and no longer moves. 4 Insert the cables through the PKT-3H, then affix the cable bushings and cable ribs to the wires.
Installation Guide AT-PKT-3H 5 Affix the cable ribs to the AT-PKT-3H using the two included screws. 6 Mount the cable tie holders* underneath the table, using the included screws. 5 * Mount one or both holders based on need.
Installation Guide AT-PKT-3H 7 Place the cables within the included cable bag. 8 Affix the cable bag to the unit using the already installed Velcro of the unit and bag. 9 Thread the cables through the cable tie and the holder then tighten the cables ties until the cables are secured.
Installation Guide AT-PKT-3H Installation Dimensions Inches Millimeters H x W x D (external) 5.51 x 6.50 x 6.50 140 x 165 x 165 W x D (internal) 3.27 x 1.65 83 x 42 Weight Pounds Kilograms Unit 0.50 0.23 Shipping 0.90 0.41 7 Certification Unit CE © 2018 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners.
atlona.com • 408.962.0515 • 877.536.