Atlona HDMI Extender over Single CAT5e/6/7 AT-PRO3HDREC User Manual atlona.
Table of Contents 1. Introduction ........................................................................................ 3 2. Package Contents ........................................................................................ 3 3. Features ........................................................................................ 3 4. Specifications ........................................................................................ 3 5. Panel Descriptions a. Front Panel ............
Introduction With the latest, more affordable HDBaseT technology, extend IR, RS-232, audio and video content between sources and displays up to 230ft (over CAT6a/7) with the PRO3HD44M matrix switcher. With pass through support of up to 1080p or 1920x1200, 3D, 2Channel and Multi-channel audio, bidirectional RS-232 and IR signals. Package Contents • 1 x AT-PRO3HDREC • 1 x IR 3.5mm Receiver • 1 x IR 3.5mm Emitter • 1 x 3.
Panel Description Front Panel 1 2 4 3 1. RS-232 - passes RS-232 control signal from matrix CAT5e/6/7 input 2. IR In - Connect IR receiver module to send signal back through the bi-directional CAT5e/6/7 connection. 3. IR Out - Connect IR Emitter to send a signal to the display for 3rd party control 4. HDMI Out - Transfers video and audio signal to display Back Panel 1 3 2 1. Power indicator - Green LED will light up when unit is receiving power from the Matrix. 2.
Connection and Installation 3rd Party Controller Set Up Note: 3.5mm 3 conductor (stereo) cables are not compatible. Please use 2 conductor (mono) IR cables with IR input ports. Important: When using a 3rd party IR controller remember to connect a mono to mono 2 conductor IR extender cable into the matrix IR IN port for IR control of the matrix switcher I/O. Note: With the latest HDBaseT technology there’s no need for a power source for the extenders as they receive power over the CAT5e/6/7 cable.
IR Remote Control Set Up Note: When using an IR remote control all sources can be controlled as well as the local display. Note: With the latest HDBaseT technology there’s no need for a power source for the extenders as they receive power over the CAT5e/6/7 cable. Blu-ray Player IR Emitter AT-PRO3HDREC IR Receiver Module IR Remote atlona.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (the AT-PRO3HDREC) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure.