Product Datasheet/Brochure

AT-VCC-RELAY-KIT
1
Sensor Signal Converter
for Velocity
™
Control System
IP to Relay
Introduction
The Atlona AT-VCC-RELAY-KIT is an accessory for the Atlona Velocity™ Control System that provides conversion
between IP control commands and relay / sensor signals. This Velocity Control Converter is very compact and can
be placed anywhere a device requires control and is not IP-capable. The VCC-RELAY-KIT is remotely powered
through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs onto any surface
via a convenient mounting dock. A simple “click” locks it into place for a secure, reliable installation. The control port
module supports DIN rail installation, and features four relay outputs plus four sensor inputs. The inputs and outputs
are both congurable for various operating modes.
• Provides conversion between IP and relay / sensor control signals for the Velocity Control System
• Compact form factor – inconspicuous and easily concealable
• Easy to set up and congure using the Velocity Control Suite
• Remotely powered via PoE (Power over Ethernet)
• Also can be powered through USB from a nearby USB power source
• Primary unit installs onto any surface via a convenient mounting dock – simple “click” locks device into place
• Control port module includes four relay outputs and four sensor inputs
• Relay outputs congurable to support common relay types – Single Pole Single Throw (SPST), Single Pole
Double Throw (SPDT), and Double Pole Double Throw (DPDT)
• Sensor inputs can be congured to support voltage or contact closure sensing
• Push-in terminal blocks for relay and sensor connections
• 4.5 foot (1.4 meter) cable
• Control port module supports DIN rail installation
• Award-winning 10 year limited product warranty
Key Features