Owner's Manual

ManualsBrandsAtlona ManualsAudio and video distributionVTP-800

Installation Guide

AT-VTP-800

Velocity 8” Touch Panel

AT-VTP-800

1 x AT-VTP-800

1 x Metal mounting plate

4 x Mounting screws

1 x Wall installation template

1 x 2-gang mud ring

1 x Installation Guide

Package Contents

Operating Notes

• The Velocity 8” Touch Panel (AT-VTP-800) must be on the same network as the Velocity

Gateway (AT-VGW-250) or it will be unable to sync for control.

• The AT-VTP-800 is PoE capable, to power the unit, simply plug it into a 802.3at compatible

network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)

can be used.

IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VTP-800 is

fully functional.

The Atlona AT-VTP-800-BL and AT-VTP-800-WH are 8” touch panels in black and white,

respectively, for the Atlona Velocity™ Control System. They feature contemporary, rened styling

for modern presentation environments with 1280x800 native resolution, and a capacitive glass

surface that supports multi-touch and gesture interactions. These touch panels conveniently

install into a wall or furniture via a US two-gang opening. Also available is the optional AT-VTP-

TMK tabletop mounting kit for placement on a meeting table or lectern. The VTP-800-BL and

VTP-800-WH feature Power over Ethernet (PoE), enabling a single network connection for data

and power. Setting up the touch panels is eortless as the AV control GUI is automatically

uploaded from the Velocity Control Gateway processor during system conguration.

Summary of content (12 pages)

PAGE 1
Installation Guide AT-VTP-800 Velocity 8” Touch Panel AT-VTP-800 The Atlona AT-VTP-800-BL and AT-VTP-800-WH are 8” touch panels in black and white, respectively, for the Atlona Velocity™ Control System. They feature contemporary, refined styling for modern presentation environments with 1280x800 native resolution, and a capacitive glass surface that supports multi-touch and gesture interactions. These touch panels conveniently install into a wall or furniture via a US two-gang opening.
PAGE 2
Installation Guide AT-VTP-800 Mounting Instructions The AT-VTP-800 has two mounting options. In-wall or an optional stand (available through atlona. com). In-wall 1 Use the included wall mount template to create a hole in the wall the correct 2-Gang size for the unit. 2 Install the back box (not included) or mud ring (included) into the wall. 3 Screw the included metal mounting plate into the mud ring using the 4 included screws. 4 Remove the two screws from the bottom of the touch panel.
PAGE 3
Installation Guide AT-VTP-800 Stand 1 Place the stand on the table/desk a If the rubber no slip guard is not secure enough, use four wall screws and thread them though the four holes on the bottom of the unit and into the desk/table. 2 Thread the Ethernet cable through the bottom rounded hole on the back of the stand and back out the rectangular hole on the front of the stand. 3 Plug the Ethernet cable into the back of the touch panel.
PAGE 4
Installation Guide AT-VTP-800 Initial Setup You will be guided through the setup process in the next few screens. CONTINUE 4 When the unit displays the IP information, press CONTINUE. a If the touch panel does not display an IP, select the Set Static IP slider. b Assign the unit a static IP. Ensure there are no other devices on the network with the same IP to avoid connection issues. Velocity Device Setup Velocity Device Setup Set Static IP IP Address 10.0.0.
PAGE 5
Installation Guide AT-VTP-800 Synchronizing Waiting for Approval CANCEL 8 On a network computer, use a browser to log into Velocity. 9 A green message will appear at the top right corner of the screen. Select Buildings. 10 On the buildings screen, press the Synchronize button on the building the touch panel is located. 11 When the rooms page opens, press the Synchronize button on the touch panel’s room. 12 Press the SAVE & CONTINUE button on the touch panel.
PAGE 6
Installation Guide AT-VTP-800 Advanced Settings Once th touch pad has been set up, the settings can be changed or reset only through the advanced settings. 1 To access the settings, swipe from the left side of the touch pad to the right. 2 Select Advanced Setup. 3 Type in the PIN. Default PIN is 554361. GATEWAY SETTINGS URL ADVANCED SETTINGS Verify your PIN 0.0.0.0 REFRESH PAGE Gateway Settings 554361 TOUCH SCREEN SETTINGS URL 0.0.0.0 Alternate URL System Volume 0.0.0.
PAGE 7
Installation Guide AT-VTP-800 Connection Diagram 2 DC 19V T 1 ETHERNE OUT HDMI -250 MDP OUT AT-VGW DC AT-VGW-250 (redundancy) 19V T 1 ETHERNE he Et 2 rn et OUT HDMI -250 MDP OUT oo m AT-VGW et rn he Et IT R AT-VGW-250 AT-VCC-IR Display  tro l  et C rn on  he Et oE /P Po E AV LAN l 1 n m oo R Volta Sens ge or Et he rn et / Conta Closu ct re SPDT DPDT on tro AT-VCC-RELAY SPST C Po E AT-VCC + Po E Et he rn et / AT-VCC-RS232 AT-VTP-800-WH AT-VTP-550
PAGE 8
Installation Guide AT-VTP-800 Version 1 atlona.com • 408.962.0515 • 877.536.3976 © 2016 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.
PAGE 9
8” Touch Panel for Velocity™ Control System Introduction The Atlona VTP-800 is a Velocity System 8” touch panel for AV control and room scheduling. It features contemporary, refined styling for modern presentation environments with 1280×800 native resolution, and a capacitive glass surface that supports multi-touch and gesture interactions. This touch panel conveniently installs into a wall or furniture via a US two-gang opening.
PAGE 10
8” Touch Panel for Velocity™ Control System Key Features • Velocity System 8” touch panel for AV control and room scheduling • Capacitive touch screen with 1280x800 resolution • Remotely powered via PoE (Power over Ethernet) – single-cable network connection for data and power • Fast, streamlined setup with automatic network discovery and configuration by the Velocity System hardware or software server gateway • Supports multi-touch and gesture interactions • Contemporary, refined styling and a
PAGE 11
8” Touch Panel for Velocity™ Control System Connection Diagram 2 1 DC 19V NET ETHER OUT HDMI W-250 MDP OUT AT-VG 2 1 DC AT-VGW-250 (redundancy) 19V NET ETHER OUT HDMI OUT MDP W-250 IT t ne AT-VGW-250 r he Et R oo m AT-VG t ne r he Et t ne r he Et AT-UHD-SW-510W AT-VCC-IR Display  C Po E et / Po E er n Et h er n et / Et h o de Vi on tro l   AV LAN AT-VCC Po E + n R oo et / Et h et / et / er n m AT-VTP-550-BL er n Po E AT-VCC Et h er n Et h AT-VCC-
PAGE 12
8” Touch Panel for Velocity™ Control System Specifications Display Panel Capacitive touch, 8” LCD, 1280 x 800 Color Depth 8 bits per channel / 16.7 million colors Audio Microphone Digital MEMS (MicroElectro-Mechanical Systems) Speaker High-Fidelity, 2 W Sensors Elecro-optical Ambient light sensor Proximity Advance “time-of-flight” sensor Power Type PoE 802.3af compliant Dimensions Inches Millimeters HxWxD 5.84 x 8.79 x 1.42 148 x 223.50 x 36 Wall, 2-gang, H x W x D 2.05 x 3.41 x 0.