Owner's Manual

AT-WAVE-101
10
Installation
Mounting Instructions
The AT-WAVE-101 comes with a standard VESA mount, for mounting to displays, monitors, etc.
1. Attach the VESA mount to the mounting surface using 4 screws (not included).
2. Turn the WAVE-101 upside down and attach the two included screws to the bottom of the unit. The screws will
stick out a small amount.
3. Turn the WAVE-101 so that the screws line up with
the large oblong shaped holes on the VESA mount
and mount the unit to the mounting plate. The unit
should slide down if fully on the VESA mount.
USB 3.0 USB 2.0
DESIGNED IN THE US -- MANUFACTURED IN THAILAND
05
Product name: ATLONA WAVE 101
Model: AT-WAVE-101
Electrical Rating:12V 2A
MAC ADDRESS:
REV #:
Contains FCC ID: PPD-QCNFA324