Owner's Manual

AT-WAVE-101
20
webGUI
Settings
Settings provides a way to set things such as logins, network settings, customized home screens, and more.
System
System
Factory Reset - Select this button, if wanting a clean slate after going through and changing the settings of the
WAVE-101. A pop up will appear to verify a reset is what is needed, select FACTORY RESET link to conrm the
reset.
Reboot - When pressed, a pop up will appear to conrm the choice. Press the REBOOT button to reboot the
WAVE-101.
Room Name - Type the name of the room here. Hit the disk icon to save the name change. This will appear at
the top of the Welcome Screen.
Country - Set the country of the unit, this is especially important if using WAVE-101 as a Wi-Fi access point, so
that the until will adapt its conguration to match the region.
NOTE: Changing the country may cause the WAVE-101’s wireless access point to become disabled due
to a channel mismatch. If this occurs, a new channel will need to be selected from the Network section.
NOTE: If a PXF le has been uploaded to the WAVE-101, the reset will remove the le.