Owner's Manual

AT-WAVE-101
25
webGUI
Display
Display Resolution
Connect a display to be able to select the resolution to pass through. The recommended resolution will be
selected by default.
... button - Select this button to display a list of compatible resolutions. A star
will appear next to the recommended default resolution.
Velocity Command Database
The WAVE-101 has a built in database with
preprogrammed commands for a wide variety of
Manufacturers and their products. This saves time on
having to refer back to other manuals to set the on/
o commands. These commands will send over IP
unless a USB to RS-232 adaptor (sold separately) is
connected, then a drop down will appear on the top
right to select between IP and RS-232.
Manufacturer, Product, Model - Select each option in
sequence from top to bottom. New options will
appear on each selection. If the manufacturer, product, or model is not listed, Generic can be used to do a
custom command.
On/O - These elds will autopopulate with the command for Power On and Power O. Commands will only
need to be manually entered if the display is not found in the built in list.
Send button - Select the orange triangle next to the command to send the command to the display. This will
allow the command to be tested to ensure it will work later.