Owner's Manual

AT-WAVE-101
9
Panel Description
1 Power Button and LED
Use this button to power the unit o, it must be
held for 4 seconds to turn the unit o. The LED will
illuminate green when the unit is on.
2 USB
Connect optional USB Wi-Fi adapter (included) here
and/or USB to RS-232 adapter (purchased separately).
If needed, the USB ports are compatible with USB
hubs for expanding the amount of USB ports.
3. HDMI OUT
Connect to an HDMI display.
4. ETHERNET
Connect to a network switch for content, control,
and/or discovery.
5. 12V DC
Connect the included 12V DC power supply from this
port to a wall outlet.
6. SD Slot
For future use.
7. Kensington Lock
Connect a Kensignton lock from this port to a table,
desk, etc to avoid unwanted removal.
USB 3.0 USB 2.0
1 2 3 4 5
6 7