Manual

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
45
Commands
CliIPAddr
Sets the IP address of the controlled device. The IP address must be specied in dot-decimal notation. Use the sta
argument to display the IP address of the device. DHCP must be disabled before using this command. Refer to the
IPDHCP command for more information.
Syntax
CliIPAddr X
Parameter Description Range
X IP address 0 ... 255 (per byte)
Example
CliIPAddr 192.168.1.61
Feedback
CliIPAddr 192.168.1.61
CliMode
Sets the login mode of the controlled device. login = requires login credentials, non-login = no login credentials
required, sta = displays the current setting.
Example
CliMode login
Syntax
CliMode X
Parameter Description Range
X Value login, non-login, sta
Feedback
CliMode login
CliPass
Sets the password for the controlled device. Execute the CliPass command without arguments to display the current
password. The default password is Atlona.
Syntax
CliPass X
Parameter Description Range
X Password 20 characters (max)
Example
CliPass R3ind33r
Feedback
CliPass R3ind33r