Atlona 16 by 16 DVI and Audio Matrix Switcher AT-HDDVI1616-AM User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 atlona.
Table of Contents 1. Introduction ........................................................................................... 3 2. Package Contents ........................................................................................... 3 3. Features ........................................................................................... 3 4. Specifications ........................................................................................... 4 5. Panel Descriptions a.
Introduction The Atlona 16 by 16 DVI and Audio Matrix Switcher is HDCP compliant, has 3 control options, 9 programmable memory presets, fast switching, and EDID learning. With switching as fast as .5 seconds and resolutions of up to 1920x1200 or 2k by 1k get the crisp video needed for presentations of all types.
Specifications Bandwidth frequency 10.2 Gbps Input Ports 16 x DVI-D (female) 16 x Stereo Audio (balanced/unbalanced) Output Ports 16 x DVI-D (female) 16 x Stereo Audio (balanced/unbalanced) 1 x RS-232 1 x Ethernet/TCP/IP 1 x 3.5mm IR Resolution outputs Video: up to 2kx1k (2048x1080p) Vesa: up to 1920x1200 Dimensions (HxWxD) 6.89x19.02x12.6 (inch) or 175x483x320 (mm) Weight 15.
Back Panel 5 1 6 7 2 8 3 4 1. Video Inputs. Sources such as DVD players and computers should be connected here. 2. Video Outputs. Video displays should be connected here. 3. Audio Inputs. Stereo audio should be connected here with a balanced or unbalanced connection. 4. Audio Outputs. Stereo audio connection output of either balanced or unbalanced audio. 5. TCP/IP connector. Connect to your switcher through a network by connecting an Ethernet cable here. 6. IR Port.
Remote Control Input Selection: Press the number corresponding with the input you wish to select, for numbers 10 and above select 10+ and the number following. Example: 10 = 10+ and 0 Menu Selection: Choose the action you wish to perform. At this time with the AT-HDDVI1616-AM the menu items you will use are AV, Video, Audio and ALL. Example: Input 3 with output 5. Press #3 in the input section, press AV, and then press #5 in the output section. The LCD display will show the input as 3AV5 on its screen.
TCP/IP Set Up First Step: Configuring IP Go to the Network Connections folder and right click on the connection you would like to edit. Select Properties. Find Internet Protocol in your list. There will be either Version 4 or 6, if there are both protocols choose Version 4. Once highlighted click on the properties Once the window comes up enter in buttons below the list box. the IP address, subnet mask, default IP address: 192.168.0.80 gateway, preferred DNS server and Subnet mask: 255.255.255.
Select the “system info” or “change password” buttons to change the information for the matrix. Once the system info button is selected it will switch to the Network page. To add this to a network, change the “0” in the IP, Gateway, and DNS server to “1”. Press the apply button at the bottom of the page, then the reset device button in the top button menu. Change the IP on the computer from 192.168.0.80 to 192.168.1.80 then type the 192.168.1.178 into the address bar.
RS-232 Connection RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them, some will be unassigned. No. 1 2 3 4 5 6 7 8 9 5 4 3 2 1 9 8 7 6 Baud Rate: 9600bps Data Bit: 8bits Pin ---Tx Rx ---Gnd ------------- Parity: None Function Not used Transmit Receive Not used Ground Not used Not used Not used Not used Stop Bit: 1bit Command The command codes are very sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description x1All x1All Sets selected input to all outputs (x3All would set input 3 to all) x1# x1# Sets input to corresponding output (x4# would set input 4 to output 4) All# All# Resets all inputs to corresponding outputs (input 3 to output 3, input 4 to output 4, etc...
Default Default is used for when all displays support 1920x1200. If a display does not support this resolution then it will show only a black screen. (i.e. Output5 having the native resolution of 1280x720 would cause it to show only a black screen in default) 1280x720 1920x1280 Input 4 Output 5 1920x1200 Output 2 1920x1200 Input 2 1920x1200 Output 11 1280x720 Input 8 Learning Learning EDID allows for the resolution and audio formats of a display to be saved to an input source.
Connections Laptops Cameras PCs PC w/RS-232 and TCP/IP AT-HD610 Projectors AT-PA100 PCs Toll free: 1-877-536-3976 Local: 1-408-962-0515 12 HDTV Laptops atlona.
Safety Information Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture Do not modify the wall plug. Doing so will void the warranty and safety features. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires disconnection.
Warranty Limited Warranty Atlona Technologies warrants that (a) its products (AT-HDDVI1616-AM) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure.