User Manual AtlonA 8x8 HDMI matrix Switch with 8 x CAT5 Receivers included AT-PROHD88M-SR HDMI MATRIX 8:8:2 AT-PROHD88M-S AT-PROHD88M-R FRONT VIEW FRONT VIEW AT-PROHD88M-R AT-PROHD88M-S REAR VIEW www.atlona.
TABLE OF CONTENTS 1. Introduction .................................................. 3 2. Package Contents .................................................. 3 3. Features .................................................. 3 . 'LDJUDP .................................................. 4 5. Specification .................................................. 6. Panel Description .................................................. ..............................
INTRODUCTION Atlona Technologies’ AT-PROHD88M-SR is an 8x8 HDMI Matrix Switcher over Twisted Pair designed to work as a switcher for multiple Audio/Video sources and displays. The Atlona unit is capable of switching HDMI signals between eight sources (such as: Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) and eight displays. Because it is a matrix switch, any or all of the 8 inputs can simultaneously be switched to any or all of the outputs. Along with supporting HDMI 1.
',$*5$0 8* HDTV 8* HDMI Source 2x CAT5e cable PS3 HDMI cable Blu-ray Disc Player AT-HD88M-R AT-HD88M-SR’s remote control TiVo AT-HD88M-R IR receiver HDMI Camera AT-HD88M-R AT-HD88M-R Source device’s remote control www.atlona.
SPECIFICATIONS: Operating Temperature Range Operating Humidity Range Input Video Signal Input DDC Signal Video Format Supported -5 to +35°C (-41 to +95 °F) 5 to 90 % RH (no condensation) 0.5-1.0 volts p-p 12v (main unit) and 5v (receivers) HDTV: 480p/576p/720p/1080i/1080p (50/60Hz) Computer: up to 1920x1200 All latest HDMI audio formats including Dolby TrueHD and DTS-HD HDMI 1.
2. Rear Panel 11 1 2 3 4 5 6 1. IR extension. 2. RS485 port. 3. LAN port. 4. IR emitter, corresponding to the Input port from 1 to 8 5. RS232 port. 6. Output 1 to 4 with HDMI and CAT5E. 7 8 9 10 7. Input ports 1 to 4. 8. Power input. 9. Output 5 and 8 with HDMI and CAT5E. 10. Input ports 5 to 8. 11. DIP switch setting.
CONNECT AND OPERATION 1) Connect the HDMI input sources (such as HD-DVD, PS3, AppleTV, DirecTV etc) into the inputs on ATPROHD88M-SR. 2) Connect the HDMI outputs from AT-PROHD88M-SR (such as LCD, Plasma, LED, Projector, Monitor) 3) Power on the input source you want to show. (Keep the unused input power OFF, otherwise it may interfere with the normal display.) 4) Use IR remote, front panel, RS232, TCP/IP or RS485 connections to choose desired input source.
DIP#1: Auto EDID Management (ADM) is a smart function which will allow users to have matrix switch figure out the best and most appropriate EDID. The way it works: Atlona 8x8 matrix acquires EDID from all the outputs and after processing it, chooses the EDID which will work on all the outputs. Example # 1: User has 8 outputs connected where 6 of the outputs are 1080P TV’s only and the other 2 locations are 720P TV’s.
VERY IMPORTANT: If one of your Output devices is a projector or a display with a unique resolution your sources/source which are/is connected to the switch might not send out a proper video format which will result image to intermit or signal not show up on the display. Solution: Make sure your DIP switch configuration is either DIP # 1 or # 2. Route the device in question to the output in question.
RS232 CONTROL: Baud Rate: Data bits: Parity: Stop bits: Flow control: 9600 bps 8 bits None 1 bit None RS232 Cable Wiring: AT-PROHD88M-SR Pin Definition 1 NC 2 Tx 3 Rx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC Note: ‘ Pin 1 2 3 4 5 6 7 8 9 Controller Definition NC Rx Tx NC GND NC NC NC NC ’ is carriage return.
Output 3 < > Output 4 < > Output 5 < > Output 6 < > cir 20 cir 21 cir 22 cir 23 cir 24 cir 25 cir 26 cir 27 cir 28 cir 29 cir 30 cir 31 cir 32 cir 33 cir 34 cir 35 cir 36 cir 37 cir 38 cir 39 cir 40 cir 41 cir 42 cir 43 cir 44 cir 45 cir 46 cir 47 cir 48 cir 49 cir 50 cir 51 cir 52 cir 53 cir 54 cir 55 cir 56 cir 57 cir 58 cir 59 Output 3 select Input1 Output 3 select Input2 Output 3 select Input3 Output 3 select Input4 Output 3 select Input5 Output 3 select Input6 Output 3 select Input7 Output 3 se
Output 7 < > Output 8 < > cir 60 cir 61 cir 62 cir 63 cir 64 cir 65 cir 66 cir 67 cir 68 cir 69 cir 70 cir 71 cir 72 cir 73 cir 74 cir 75 cir 76 cir 77 cir 78 cir 79 Output 7 select Input1 Output 7 select Input2 Output 7 select Input3 Output 7 select Input4 Output 7 select Input5 Output 7 select Input6 Output 7 select Input7 Output 7 select Input8 Output 7 select Input previous Output 7 select Input next Output 8 select Input1 Output 8 select Input2 Output 8 select Input3 Output 8 select Input4 Output
SAFETY INFORMATION Safeguards To reduce the risk of electric shock, do not expose this product to rain or moisture. If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket. Do not modify the wall plug. Doing so will void the warranty and safety features. This equipment should be installed near the socket outlet and the device should be easily accessible in case it requires disconnection.
1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt.
ATLONA PRODUCT REGISTRATION Thank you for purchasing this Atlona product — we hope you’ll enjoy it. We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates. At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure.
