User Guide

26
27
Settings
Change various settings to customize your Hexyz Force experience.
Tutorial Toggles the in-game Tutorial messages. You can review these later.
Cursor Memory Determines if the cursor's last position is remembered
during battle.
Battle Voices Toggles battle voices.
Saving the Game
You can save when you come into
contact with save points and press the
≈ button. Select the file you’ll save
into. If you select a file which already
has game data on it, it will overwrite
it. To save the data, you will need a
Memory Stick Duo™ with more than
448KB of free space available.
Load
•You can save up to 50 save games.
•Please do not take the memory stick out, or turn the power off while you save
and load.
You can load previously saved data.
Choose the file you want to load, and
press the ≈ button.
Rotation Determines if the Mini-map rotates with the camera in the field.
Message Skip Toggles the Message Skip function.
Message Log Determines if the Message Log can be displayed in an
event with the √ button.
Move setting Sets field movement speed.
Mini-map Toggles the Mini-map display in the Field Map.
Install Determines if the Installation Data is used.
Install
By installing some of the Hexyz Force game data to your Memory Stick Duo™,
you can reduce the load times, as compared to just loading from the UMD.
To install, you must have the UMD in the PSP and a Memory Stick Duo™ with
over 82MB of space.
Moving Installed Game Data
Putting all the data on your Memory Stick Duo™ will take some time. During
this time, do not remove the Memory Stick Duo™, or turn the power off.
Make sure that your batteries are fully charged, or that you are using an AC
adapter.
If you decide to move your install data to another Memory Stick Duo™, be
sure to remember to also move your save game data, as well, or the new
Memory Stick Duo™ with the install will not have access to your save data.
Turning the Install On/Off
To use the install option, use a Memory Stick Duo™ that you have saved the
install data to, go to the settings menu, and turn the “Install” option “On.”