User's Manual

AVR2043
23
8345A-AVR-11/10
6 Mechanical description
The REB231ED is manufactured using a low-cost, two-layer printed circuit board. All
components and connectors are mounted on the top side of the board.
The format was defined to fit the EXPAND1 connector on the Atmel AVR STK500 /
STK501 microcontroller evaluation board. The upright position was chosen for best
antenna performance.
Figure 6-1. Mechanical outline (dimensions in mm).
Table 6-1. REB231ED mechanical dimensions.
Dimension Value
Width x 57mm
Width y 57mm