User's Manual

22
Atmel AVR2080
8479A-AVR-01/12
B.2 Europe
If the device is incorporated into a product, the manufacturer must ensure compliance
of the final product to the European harmonized EMC and low-voltage/safety
standards. A Declaration of Conformity must be issued for each of these standards
and kept on file as described in Annex II of the R&TTE Directive.
The manufacturer must maintain a copy of the device documentation and ensure the
final product does not exceed the specified power ratings, and/or installation
requirements as specified in the user manual. If any of these specifications are
exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards. The “CE“ marking must be affixed to a
visible location on the OEM product. The CE mark shall consist of the initials "CE"
taking the following form:
• If the CE marking is reduced or enlarged, the proportions given in the above
graduated drawing must be respected.
• The CE marking must have a height of at least 5mm except where this is not
possible on account of the nature of the apparatus.
• The CE marking must be affixed visibly, legibly, and indelibly.
More detailed information about CE marking requirements you can find at
"DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL" on 9 March 1999 at section 12.