User's Manual

Atmel AVR2042
5
8334A-AVR-05/11
4 Mechanical description
The REB-CBB is manufactured using a two-layer printed circuit board (PCB). All
active components are mounted on the bottom side, and all connectors and user I/Os
are located on the top side using through-hole components. The radio extender board
is plugged into the 2 x 20 female header, Expand1, vertically.
Figure 4-1. Mechanical outline.
Table 4-1. REB-CBB mechanical dimensions.
Dimension Value
Width x 57mm
Width y 60mm
PCB standoff height 5mm
Height without REB 18mm
Height with REB231ED plugged in 70mm
5mm
5mm
18mm
60mm
57mm
70mm