User's Manual

AVR600
3
8293-AVR-02/10
Figure 3-1 RZ600 used in conjuntion with PC
RF Link
RZ600 Processor Board
RZ600 RF Board
3.1 Kit Contents
The RZ600 kit contains the following pieces of hardware:
• 2 pcs. AT86RF230 radio cards: miniature carrier board with the AT86RF230 radio
transceiver mounted, SMA antenna connector, one wire ID chip and Atmel
standard 10-pin connector.
• 2 pcs. AT86RF231 radio cards: miniature carrier board with the AT86RF231 radio
transceiver mounted, SMA antenna connector, one wire ID chip and Atmel
standard 10-pin connector.
• 2 pcs. AT86RF212 radio cards: miniature carrier board with the AT86RF212 radio
transceiver mounted, SMA antenna connector, one wire ID chip and Atmel
standard 10-pin connector.
• 2 pcs. AVR UC3 based processor cards: usb dongle form factor board with
AT32UC3A3256 processor mounted, LEDs, UART connection and host side
Atmel standard 10-pin connector.
• 2 pcs. 2.4GHz SMA stub antenna. These are shared between the AT86RF230
and AT86RF231 radio transceivers.