User's Manual
Table Of Contents
Specifications
ZigBit™ 2.4 GHz Wireless Modules 3-14
8226C–MCU Wireless–09/10
9. Using ferrite bead and 1 µF capacitor located closely to the power supply pin is recommended, as
shown below.
10. Pins 44 through 48 are not designed for the ATZB-24-A2 module. Note these pins are used in
ATZB-24-B0, see them in antenna schematics below.
11. In SPI mode, USART0_EXTCLK is output. In USART mode, this pin can be configured as either input
or output pin.
For ATZB-24-B0 combined with PCB
Antenna
For ATZB-24-B0 combined with External
Antenna