User Manual

ATZB-EVB-XXX-XXX User Manual

AVR-09-2011

# Stack parameters being set to Config Server

---------

CS_AUTONETWORK = 1

# If CS_AUTONETWORK is 1 CS_CHANNEL_MASK

should be declared

CS_CHANNEL_MASK = "(1l<<0x15)"

# Parameter is used only for RF212

CS_CHANNEL_PAGE = 0

CS_RF_TX_POWER = 3

CS_END_DEVICE_SLEEP_PERIOD = 5000

CS_NEIB_TABLE_SIZE = 8

CS_MAX_CHILDREN_AMOUNT = 7

CS_MAX_CHILDREN_ROUTER_AMOUNT = 2

CS_ROUTE_TABLE_SIZE = 25

CS_ADDRESS_MAP_TABLE_SIZE = 25

CS_ROUTE_DISCOVERY_TABLE_SIZE = 10

CS_APS_DATA_REQ_BUFFER_SIZE = 4

CS_APS_ACK_FRAME_BUFFER_SIZE = 3

CS_DUPLICATE_REJECTION_TABLE_SIZE = 7

CS_NWK_DATA_REQ_BUFFER_SIZE = 4

CS_NWK_DATA_IND_BUFFER_SIZE = 4

USE_STATIC_ADDRESSING = 0

# Used only for static addressing

CS_NWK_ADDR = 0x7001

USE_NETWORK_KEY = 0

# Pre-configured key which is used by NWK

# If it is not TRUST CENTRE &&

CS_ZDO_SECURITY_STATUS=3 the key is cleared by

ZDO

CS_NETWORK_KEY =

"{0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC

,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC}"

#0 - preconfigured network key

#1 - preconfigured trust centre link key

#2 - preconfigured trust centre master key

#3 - not preconfigured

CS_ZDO_SECURITY_STATUS = 3

To compile WSNDemo application use make utility. Otherwise, open the

WSNDemo.aps file from the “./Sample Applications/WSNDemo/“ subdirectory