User Manual
ATZB-S1-256-3-0-U ZigBit 2.4GHz Single chip Wireless Module [DATASHEET]
42199AWIRELESS10/2013
12
Figure 3-3. ATZB-S1-256-3-0-U Foot Print Dimensions
Figure 3-4. ATZB-S1-256-3-0-U Mounting Information
3.6 List of Approved Antennas
The ATZB-S1-256-3-0-U Module has been tested and approved by Certification body to use any of the antenna listed
below or similar antenna with lesser gain
Description
Manufacturer Partnumber
Antenna gain
2.4GHz Miniature Pigtail Antenna from RF
Solutions
ANT-24G-S21-P5FL
odBi
2.4GHz 5dBi Rubber Antenna with pigtail cable
(Flying Lead) from Tekfun
M07-FL
5dBi
3.7 Soldering Profile
The J-STD-020C-compliant soldering profile is recommended according to Table 3-9.
Table 3-9. Soldering Profile
(1)
.
Profile feature
Green package
Average ramp-up rate (217°C to peak)
3°C/s max
Preheat temperature 175°C ±25°C
180s max
Temperature maintained above 217°C
60s to 150s
Time within 5°C of actual peak temperature
20s to 40s
Peak temperature range
260°C
Ramp-down rate
6°C/s max
Time within 25°C to peak temperature
8 minutes
Note: 1. The package is backward compatible with PB/Sn soldering profile.