08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 ..............................................................................................
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 6163A–DRMSD–12-Jul-05
Table of Contents Section 1 1.1 1.2 1.3 1.4 1.5 Introduction ...............................................................................................1-1 Connection Instructions ............................................................................1-1 Front Panel ...............................................................................................1-2 Implementation .........................................................................................1-2 Optional Functions ........
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide 6163A–DRMSD–12-Jul-05
Section 1 Connecting the 08PIA-DK 1.1 Introduction The 08PIA-DK is a high quality stand-alone evaluation board based on the ATSAM9708 and the ATSAM3303 dedicated to digital piano and keyboard instruments. 1.2 Connection Instructions ! Connect the front panel to the main board. ! Connect the main board to a FATAR TP10 (or TP23) keyboard. ! Connect the main board to pedal (see Table 1-1 for pinout). ! Connect the main board audio outputs to line level inputs of a mixer, a stereo sound system, etc.
Connecting the 08PIA-DK 1.3 Front Panel Figure 1-1. 08PIA-DK Front Panel Tempo + Style Selection Tempo - Rhythm Only Equalizer: - Treble - Bass Set Variation Instrument Select Chorus Demo Reverb Rec Mode Dynamic Track 2 Intro/Ending Track 1 Fill In/Key Start Metronome Start/Stop 1.4 Implementation 1.4.1 Instrument Select Play/Rec Start Table 1-2.
Connecting the 08PIA-DK 1.4.2 Reverb Type Possible settings are: ! Room1 ! Room2 ! Hall Reverb depth can be set for each instrument. Follow the steps below: 1. Hold the “Reverb” button pressed down. 2. Use the “Tempo +/-” buttons to adjust the reverb depth in the range from 0 to 20 1.4.3 Chorus Possible settings are: ! Off ! Chorus1 ! Chorus2 Chorus depth can be set for each instrument. Follow the steps below: 1. Hold the “Chorus” button pressed down. 2.
Connecting the 08PIA-DK 1.4.7 Metronome Possible settings are: ! On ! Off The metronome signature can be set. Follow the steps below: 1. Hold the “Metronome” button” pressed down. 2. Use the “Tempo +/-” buttons to choose the signature. Available signatures are 1/4, 2/4, 3/4, 4/4, 6/4, 6/8, 12/8. 1.4.8 Sequencer Use “Rec Mode”, “Play/Rec Start”, “Track 1" and “Track 2" buttons. Below is an example of how to use the sequencer: ! Record track 1: 1. Press the “Rec Mode” button. The “Rec Mode” LED is lit.
Connecting the 08PIA-DK 1.5 Optional Functions 1.5.1 Style Player Use “Intro/Ending”, “Fill-In”, “Start/Stop”, “Variation”, “Rhythm Only” and “Style Selection” buttons. 1.5.2 Style Selection Hold the “Style Selection” button and select with “Tempo+/-” buttons. Table 1-3.
Connecting the 08PIA-DK 1-6 6163A–DRMSD–12-Jul-05 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Section 2 Revision History 2.1 Document Details 2.1.1 Title 08PIA-DK User Guide 2.1.2 Literature Number 6163 2.2 Revision History 2.2.1 Version A First issue.
Revision History 2-2 6163A–DRMSD–12-Jul-05 08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg.
