User Manual

2.17 Wiring
Table 2.2 - Pin Listing
Leave openX2 matrix drive lineOX232
Leave openX1 matrix drive lineOX131
Leave openX0 matrix drive lineOX030
Leave open or Vdd
Reset low;
has internal 30K ~ 80K pull-up
I/RST29
Y2A line connectionIY2A28
Leave open
Y1A line connectionIY1A27
Y0A line connectionIY0A26
Leave open
Y2B line connectionIY2B25
Y1B line connectionIY1B24
Leave open
Y0B line connectionIY0B23
Leave openNot usedN/ANC22
-Supply groundPVss21
-Power, +3 ~ +5VPVdd20
VddMains sync inputISYNC19
-Power, +3 ~ +5VPVdd18
-SPI clock inputISCK17
-SPI data outputOMISO16
-SPI data inputIMOSI15
-
SPI slave select;
has internal 20K ~ 50K pull-up
I/SS14
-
1= Comms ready;
has internal 20K ~ 50K pull-up
ODRDY13
-Sample drive outputOSMP12
Leave openScope Sync: Synchronization test signal outputOS_Sync11
-0.05V nominal +/-10% via external dividerIVref10
Leave openX7 matrix drive lineOX79
Leave openX6 matrix drive lineOX68
Leave openX5 matrix drive lineOX57
-Power, +3 ~ +5VPVdd6
-Supply groundPVss5
-Power, +3 ~ +5VPVdd4
-Supply groundPVss3
Leave openX4 matrix drive lineOX42
Leave openX3 matrix drive lineOX31
If Unused, Connect To..CommentsI/OFunctionPin
lQ 8 QT60248-AS R4.02/0405