User manual

Installation procedure for Windows 98SE

Software Installation

1. Insert DRIVER CD into your CD-ROM. Following screen will appear. If the

screen doesn’t appear, go to “Start” ⇒ “Run”, then type in

F:\autorun\autorun.exe

(where ‘F’ is your CD-ROM drive) and press the enter key.

DO NOT PLUG YOUR USB WIRELESS LAN CARD INTO YOUR SYSTEM UNTIL

THE DRIVER HAS BEEN INSTALLED.

Refer to the trouble shooting

section if you have already plugged in your WLAN

card.

2. Click on “Windows 98SE Installation” to begin installation.