User manual

Installation procedure for Windows 2000
Software Installation
1. Insert DRIVER CD into your CD-ROM. Following screen will appear. If the
screen doesn’t appear, go to “Start” ⇒ “Run”, then type in
F:\autorun\autorun.exe
(where ‘F’ is your CD-ROM drive) and press the enter key.
DO NOT PLUG YOUR USB WIRELESS LAN CARD INTO YOUR SYSTEM UNTIL
THE DRIVER HAS BEEN INSTALLED.
Refer to the trouble shooting
section if you have already plugged in your WLAN
card.
2. Click on “Windows 2000 Installation” to begin installation.
20