User manual

Installation Procedure for Windows ME

Software Installation

1. Insert DRIVER CD into your CD-ROM. Following screen will appear. If the

screen doesn’t appear, go to “Start” ⇒ “Run”, then type in

F:\autorun\autorun.exe

(where ‘F’ is your CD-ROM drive) and press the enter key.

Warning: DO NOT PLUG YOUR USB WIRELESS LAN CARD INTO YOUR

SYSTEM UNTIL THE DRIVER HAS BEEN INSTALLED.

Refer to the trouble shooting

section if you have already plugged in your WLAN

card.

2. Click on “Windows ME Installation” to begin installation.