User manual

Channel Selection
You cannot change the channel selection if you are using infrastructure mode. The
utility program will choose the optimal channel for you when you are in
infrastructure mode.
If you are in ad-hoc mode, then you are required to select a channel. By clicking
on the channel field, you can then select channels from 1 to 14.
To communicate to your friends through ad-hoc mode, both you and your friends
must set it to the same channel.
Note: If a lot of hosts are communicating with the same channel, then you may
experience some lag. Refer to the effective bandwidth section in the FAQ
for more
information on why this is the case.
50