User manual

2. Try to ping yourself by typing the command:

ping <your_IP_address>

E.g. ping 192.168.1.166

If you receive replies then it means that your WLAN is working. Otherwise,

proceed to the ping troubleshooting

section to solve your connection problem.

3. Using the same procedure, try to ping your gateway (using your gateway IP

address). If you get replies from your gateway, then congratulations, you can

start using your ATMEL USB Wireless LAN!

If you did not receive replies from your gateway, then the network might be down

temporarily. Ask your System Administrator or Internet Service Provider for

further details.