User manual

Problem: It gives me error messages when I press the submit button.
Error message type:
 Invalid WEP Key. Need hexadecimal digits.
 This problem arises because you have typed in a non-hexadecimal
digit. That is, you have typed a key outside the range 0 ~ 9 and A ~
F. When you click on the “OK” button of the error screen, monitor
utility will highlight the first occurrence of non-hexadecimal digit.
 Invalid WEP Key length.
 This problem arises because the key you supplied is either over the
allowed length (10 values for 64bits and 26 values for 128 bits
encryption) or under the required length. If your key field is over
the allowed length, the utility will highlight the extra values for you
to delete. If it is under the required length, it will point to the key
where the length is under, you have to fill the Key to the require
field and then click submit button to try again.
90