User's Manual
Table Of Contents
- 1. Start using MISSION2
- 2. Widget
- 3. Dive Mode
- 3.2 Scuba Mode
- 3.3 Freedive Mode
- 3.4 Gauge Mode
- 4. GPS
- 4.1 Dive GPS
- 4.2 Onshore GPS
- 5. Activities
- 5.1 Running Mode
- 5.2 Cycling Mode
- 5.3 Swimming Mode
- 5.4 Ski/Board
- 6. Storage and Maintenance
Step 2 - Please ensure the mobile phone has GPS turned on, and allow ATMOS App to obtain
location information.
Step 3 - Go to the weather widget, the weather data will be obtained and displayed
1. Open the APP and pair the watch with the APP
2. Please ensure the mobile phone has GPS turned on, and allow ATMOS App to obtain
location information.
3. ATMOS App > Weather widget, obtain and display the weather data
4. Please check MISSION2 Widget if weather information is displayed
2.7 Stopwatch
Press and Hold button C for 2 seconds while in watch mode.
Press button A: Start
Press button B: Mark current time (4 set can be displayed)
Press button A: Stop
Press button A when stopped: Reset
Press and Hold button D for 2 seconds: Exit
2.8 Alarm Clock
MISSION2 provides three alarm clock settings
1. Go to Setting, select the alarm clock
2. Set the hours and minutes (12-hour clock will require choosing AM or PM)
3. Select Once, Weekday, Daily
4. Select vibration, sound, or both for Reminder