User's Manual
Table Of Contents
- 1. Start using MISSION2
- 2. Widget
- 3. Dive Mode
- 3.2 Scuba Mode
- 3.3 Freedive Mode
- 3.4 Gauge Mode
- 4. GPS
- 4.1 Dive GPS
- 4.2 Onshore GPS
- 5. Activities
- 5.1 Running Mode
- 5.2 Cycling Mode
- 5.3 Swimming Mode
- 5.4 Ski/Board
- 6. Storage and Maintenance
3. Dive Mode
3.1.1 Water Auto-on
※ Do not rely on the water auto-on function. It is important to check all settings of the
dive computer prior to descent on each dive.
The MISSION2 default dive mode of auto-on is Scuba Mode. The default dive mode may be
changed in SETTING. MISSION2 will display the selected dive mode when you enter water.
※ The default dive mode can be set to "Off" - when it is off, MISSION2 will not
automatically turn on dive mode, and no icon will appear at the bottom of the time
screen.
3.1.2 No Fly Time and Surface Interval
Due to residual nitrogen in the body after diving, please wait until the No Fly time icon
disappears before flying or ascending to altitudes above 300m/1,000ft.
Upper-left: No fly time Icon. Displays for 24hrs starting from the moment you exit the water
following the last dive. (Icon will be displayed when freedived over 40m)
Upper-right: Surface interval (S.I.) icon. Counter starts from the moment you exit the water
following your last dive.