User's Manual
Table Of Contents
- 1. Start using MISSION2
- 2. Widget
- 3. Dive Mode
- 3.2 Scuba Mode
- 3.3 Freedive Mode
- 3.4 Gauge Mode
- 4. GPS
- 4.1 Dive GPS
- 4.2 Onshore GPS
- 5. Activities
- 5.1 Running Mode
- 5.2 Cycling Mode
- 5.3 Swimming Mode
- 5.4 Ski/Board
- 6. Storage and Maintenance
* Quick Start Guide
* Warranty card
1.3 Removing/replacing the strap
In addition to the originally provided long straps, MISSION2 has short straps available for
purchase. If you need to adjust the length of the strap, you can replace strap according to
the following instructions.
Change watch strap:
When removing the strap, push the strap spring clip to the right, lift it up to take out the
strap, and release the strap spring clip. To replace a new strap, simply follow the opposite
steps.
* The strap is a consumable item and when it must be replaced with a new strap, you can
make a purchase through the dealer or directly at ATMOS.
1.4 Using MISSION2 for the first time
1.4.1 Button Function:
Press button A: Up/ Smart Notification Hold button A: Quick mobile phone Bluetooth On/Off
Press button B: Menu and Confirm
Press button C: Down/ Widget Hold button C: Stopwatch
Press button D: Return/ Setting
Press button E: Turning backlight On/Off Hold button E: Power Off