User's Manual
Table Of Contents
- 1. Start using MISSION2
- 2. Widget
- 3. Dive Mode
- 3.2 Scuba Mode
- 3.3 Freedive Mode
- 3.4 Gauge Mode
- 4. GPS
- 4.1 Dive GPS
- 4.2 Onshore GPS
- 5. Activities
- 5.1 Running Mode
- 5.2 Cycling Mode
- 5.3 Swimming Mode
- 5.4 Ski/Board
- 6. Storage and Maintenance
Press button D on the main swimming
screen, and the pause screen will appear
Press button A to return to the main
screen Press button C to save and exit
5.3.5 Inaccurate Information
When swimming in pool, the following conditions may result in inaccurate information:
1. Stop before reaching the end
2. Change swimming strokes in between
3. Swimming using a floating board without hand stroke
4. Dynamic Apnea without hand stroke
5. Side kicking, one arm stroke, back floating, and other informal strokes will affect the
accuracy of the record.
* When swimming outdoors, it is necessary to ensure that the positioning is successful
before the start to exercise. If the positioning is not successful before starting to move, the
accuracy of the daily log record will be affected.
5.4 Ski/Board
※ Due to the characteristics of the battery, using MISSION2 in a sub-zero environment may
encounter a situation where it cannot be powered on. It is recommended to power it on
before entering an extremely cold environment. Avoid rinsing it with hot water when
returning from a sub-zero environment to avoid damage caused by thermal expansion.
5.4.1 Ski/board Preparation Screen and Operation
* The GPS will start blinking and positioning. It will stop blinking and display a green light
once the positioning is complete.
* Heart rate: People with cold weather or cold hands and feet will not be able to interpret
the heart rate accurately due to the poor blood circulation efficiency in the body.
* Press button C to enter Setting
* Press button B to start activity
Skiing
Snowboarding