User's Manual
Table Of Contents
- 1. Start using MISSION2
- 2. Widget
- 3. Dive Mode
- 3.2 Scuba Mode
- 3.3 Freedive Mode
- 3.4 Gauge Mode
- 4. GPS
- 4.1 Dive GPS
- 4.2 Onshore GPS
- 5. Activities
- 5.1 Running Mode
- 5.2 Cycling Mode
- 5.3 Swimming Mode
- 5.4 Ski/Board
- 6. Storage and Maintenance
1.8.1 Change Watch Face
Change via mobile APP
After pairing MISSION2 to the ATMOS App, go to the Watch Face option of Your Device and
select the desired Watch Face
Change via MISSION2
Settings Menu > Watch Face> Press button A or C to scroll, and press button B to select the
desired Watch Face.
1.8.2 Customize surfaces with photos
After pairing the ATMOS App with MISSION2, go to Your Device > Watch Face > Photo,
select your desired photo from the album as your Watch Face
2. Widget
* Most widgets can be enabled in Settings > Widget
* Press button C on the main screen to view widgets
2.1 Heart rate measurement
※ The wrist optical heart rate sensor measures the heart rate with the LED optical sensor
on the device. The blood flow per unit area in the blood vessel will change with the heart
pulse, and the light sensor will obtain the change of the user's heart rate based on the
change of the blood.
Enable Heart Rate: Settings > Widget > Heart Rate: On
Checking the heart rate: after enabling the widget, press button C on the main screen to
scroll to the information page.
※ To ensure accuracy, MISSION2 should be worn correctly and should not be worn on the
wrist joints.
※ When exercising or in daily use, MISSION2 should be snugly worn on the skin of the wrist
to avoid uneven reflection of the light beam. Objects such as long-sleeved clothing or
winter clothing shall also be avoided.