Aries 330 “Warrior” Aries 350c “Guardian” Aries 6800c/7800c “Defender” u s e r ` s g u i d e AMERICAN TECHNOLOGIES NETWORK CORP.
5 Diopter Elevation Windage Reticle system New Titanium mounting system (mounts to std. U.S.
APPLICATION The Aries 330 “Warrior” is an affordable, high quality 1st. generation weapon sight. It sports features such as a new super fast front lens system for optimal brightness, easy push button operation and a reticle brightness adjustment. The Warrior also comes with our new detachable, most powerful in the industry 450mw Infrared Illuminator with dedicated windage and elevation adjustments.
PREPARATION FOR OPERATION Before getting started make sure to follow these steps: • Install the battery into its housing with the polarity order shown on the main body of the unit. • Switch on the Aries scope with the protective lens cover still attached to the lens. • Make sure that the green luminance of the light intensifier tube is present. • Observe the scene, and adjust the diopter and/or lens for optimal image clarity.
IR ILLUMINATION Infra-red (IR) Illuminators are common for night vision technology. The IR light greatly enhances the performance of your Aries scope, while remaining almost totally invisible to the naked eye. In dark environment, power up the Aries scope. Now, find a scene and examine it without the IR on then with IR powered up. Note the difference in illumination.
WINDAGE AND ELEVATION Aries 350c/6800c/7800c Elevation Windage Aries 330 Elevation Windage The vertical and horizontal adjustments for the Aries can be achieved by turning the elevation and windage adjustment mechanisms (remove dust caps first). Each click equals 1/8 inch at 100 yards for the 350 and 6800/7800. 1/4 inch for the 330. When reaching the maximum range of rotation do not use force.
2 YEAR PRODUCT WARRANTY This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy.
For customer service and technical support, please contact American Technologies Network Corp. North American Office 20 S. Linden Ave. Suite 1B, South San Francisco, CA 94080 phone: 800-910-2862, 650-875-0130; fax: 650-875-0129 European Office phone: 44(0)870-0111286, fax: 44(0) 845-3349142 The following countries can use our toll free number 00 800 9102-8620 Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland www.atncorp.
