Aries MK 6600/6650 Aries MK 7700/7750 Aries MK 8700/8750 u s e r ` s g u i d e AMERICAN TECHNOLOGIES NETWORK CORP.
Master power (ON/OFF) switch 100m Infra-red illuminator Proximity sensor Manual focus lens; 5’ to infinity Control panel Diopter Fixator screws Aries MK6600/7700/8700 Elevation Battery compartment Windage Remote control panel Remote control Mounting bracket (mounts to standard U.S.
APPLICATION The Aries MK6600/6650/7700/7750/8700/8750 night vision weapon scope is a complex computerized system for the observation of objects at low light levels. Containing an onboard computer these scopes are some of the most advanced night vision weapon scopes in the world. The Aries MK6600/6650/7700/7750/8700/8750 consists of the objective lens assembly, ocular lens assembly and the body. The body contains the image intensifier tube assembly with the integrated high voltage power source.
LIGHT INTENSIFIER TUBE BRIGHTNESS ADJUSTMENT The green led “B” represents the light intensifier tube power ratio. Once this is lit you can adjust the brightness of the light intensifier with the “+” and “-” adjustment buttons. Green LED “B” RETICLE BRIGHTNESS ADJUSTMENT By pressing the SL button twice you switch to a yellow “R” diode next to the green one. The yellow diode represents the reticle’s brightness.
SLEEP MODE One of the greatest new features that your Smart scope has is the SLEEP mode. This feature has been designed to considerably extend the period of scope’s functioning, to set the scope to memorize your initial settings and endure battery’s life (by settings we mean only digital settings which include brightness of the tube, brightness of the reticle, and magnitude of the IR.
FOCUSING To focus the Aries MK6600/6650/7700/7750/8700/8750 you need to adjust the diopter first thing. Simply turn the diopter clockwise until it stops. Then concentrate on any object and slowly turn the diopter back counter clockwise until the grain in the image is sharp. When you are under low-light conditions and the daylight filter is off you may focus the front lens for the image to be sharp. The diopter is not to be adjusted.
WINDAGE AND ELEVATION To adjust vertical and horizontal positions for the Aries MK6600/6650/7700/7750/8700/8750 turn the elevation and windage adjustment mechanisms. Each click equals to 1/8 inch at 100 yards. Do not use force having reached the maximum of rotation. Windage Elevation USING THE REMOTE CONTROL Below the control box you can find the panel with two screws to fix Aries MK6600/6650/7700/7750/8700/ 8750. To plug in the remote control, remove the screws and the small panel to disclose the inlet.
RETICLE PATTERNS The Aries MK6650/7750/8750 scopes comes with five reticle patterns: • Dot • Post Aries MK6650 MK7750 MK8750 • Post with Dot • Open Cross Hair • Cross Hair You can choose your preferred pattern by pushing the Reticle Pattern Selector button.
CLEANING THE EYEPIECE You may need to clean the eyepiece of the riflescope from time to time in order to guarantee top performance. When you receive your riflescope you should check for dust on the eyepiece of the unit. First you will need to remove the eyepiece. To do that you will need to initially loosen the 2 set screws that can be found on the base. Then unscrew the eyepiece counter-clockwise to remove it.
FEATURES • Digital “Smart technology” • Total darkness technology • Internally adjustable lit reticle for windage and elevation • Automatic brightness control • Range finder • Built in 100m IR illuminator • Mounts to standard U.S. weaver • Recoil & flash resistant intensifiertube • Auto “Sleep” mode • Video/35mm camera adaptable • Superb multi-coated 6 element lens system • Manufactured exclusively by ATN • Two year warranty • Assembled in U.S.A. SPECIFICATION Total Darkness Technology ...........
2 YEAR PRODUCT WARRANTY This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its option, will either repair or replace the product, and such action on the part of ATM shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy.
For customer service and technical support, please contact American Technologies Network Corp. North American Office 20 S. Linden Ave. Suite 1B, South San Francisco, CA 94080 phone: 800-910-2862, 650-875-0130; fax: 650-875-0129 European Office phone: 44(0)870-0111286, fax: 44(0) 845-3349142 The following countries can use our toll free number 00 800 9102-8620 Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland www.atncorp.
